Cat. No. 2005

These narrow mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polypropylene cap has a built in seal ring to make these bottles leak proof.
Capacity : 60ml, 125ml, 250ml, 500ml, 1000ml.


Cat. No. 2015

Wash Bottles are made of low density Polyethylene which gives these bottles a translucent and unbreakable character. Solution can be poured easily by squeezing the bottle lightly. The cap is fitted with a flezible polyethylene delivery tube which can be aimed wherever required.
Material : Low Density Polyethylene


Cat. No. 2020

These bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
Capacity : 250ml, 500ml.


Cat. No. 2030

Aspirator Bottles are made of polypropylene and are therefore much lighter than glass. These are autoclavable, durable and dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions. Threads should be totally disengaged before autoclaving.
Capacity : 5 Ltrs, 10 Ltrs


Cat. No. 2035

Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Cap.: 100ml, 250ml, 500ml, 1000ml, 2000ml


Cat. No. 2045

Measuring Cylinder, moulded in Polypropylene, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.
Material : Polypropylene
Capacity : 50ml, 100ml, 250ml, 500ml, 1000ml


Cat. No. 2050

This burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids and bases except Hydrofloric Acid and Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases. Capacity : 25ml, 50ml.


Cat. No. 2055

Test Tube baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing and draining glassware. These are also useful for storage of test tubes or culture tubes during sterlization or incubation.
Size : 140 x 120 x 110mm, 160 x 160 x 160mm


Cat. No. 2065

Kipp's Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of apparatus. H S gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug.


Cat. No. 2090B

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.
Material Polypropylene

Centrifuge Tube

Cat. No. 2098A

Conical graduated, made of polypropylene

Cap.                          Type
15ml                           Non-sterile
15ml                           Sterile
50ml                           Non-sterile

50ml                           Sterile